Garage Floor Epoxy coating is just the best solution to enhance the appearance of the garage floor and add to its longevity. However, this is the best way to go about it; one only needs to ensure that they pick the correct time and weather conditions to undertake this project. This will help in achieving the right thickness before curing the epoxy to avoid any unwanted results.
Temperature
Temperature
is another crucial element that should be considered when applying epoxy. That
is why most garage floor epoxy products state that the ideal conditions
for applying epoxy are when the temperature is between 60-90 degrees
Fahrenheit. Application of the material to structures should not be done during
extremely cold or very hot weather as this may affect the curing and performance
of a material.
•
Heat Loss and Cold Temperatures - Cold temperatures greatly reduce the
rate of cure. The application of the solution is not advisable below 60°F.
•
High temperatures – another problem that has to do with temperature is when
the temperatures in the garage are extremely high. It is also bad for the epoxy
because it cures too
quickly,
thus reducing the amount of working time.
Ensure
that the substrate temperature is within the range of 70-80°F during the
application and curing processes. It also means that the climate in this
moderate temperature range is ideal for the right application and duration of
curing. The temperature range can be maintained using temporary heating or
cooling equipment set inside the construction site.
Humidity
Secondly,
the type of climate prevailing in the region is also a significant factor that
affects the temperature inside the garage, in addition to humidity. Epoxy cures
better at relatively low humidity, and this is ideal for a range of 30-50%
humidity. Products that have high humidity will take a longer time to cure or
may not cure properly at all, depending on the intensity of the humidity. The
effectiveness of this method is increased by using dehumidifiers to decrease
the general humidity before application in damp garages.
Additional Tips
·
Preparation: All preparations, inclusive of preparing the
floor by thoroughly washing and etching the concrete before applying epoxy, are
mandatory despite the season.
·
Ventilation: Allowing fresh air in through the opening of
doors and windows or using a fan is ventilation and is best done during
summer/humidity.
·
Cure
Time: The cure time of the
epoxy coatings varies from 24 to 72 hours most of the time. This time should be
avoided when parking vehicles or moving vehicles with much traffic.
Conclusion
Suppose you want to have the best outcome when using garage floor epoxy. In that case, you should ensure you take the time to consider some important factors like the weather, the temperatures, the humidity levels, and even the floor preparation and ventilation, among other factors. For temperatures, it is possible to coordinate the project to occur in moderate temperature seasons, and for humidity, heating, and dehumidifying equipment can be used when necessary. When applied correctly, the epoxy will go on and then cure to give a longer-lasting surface, which is desired in this application.
No comments:
Post a Comment