Applying Garage FloorEpoxy coatings has emerged as one of the most common methods of refinishing and reinforcing garage floors. It revives old, stained concrete and makes it look as good as new with qualities that are both permanent and attractive. However, which of them is the most suitable candidate for garage floor epoxy? The suitability of epoxy coatings to types of properties and garages is the focus of this article.
Garages with
Existing Concrete Floors
The other crucial
factor to consider in the application of epoxy coating is the presence of a
concrete slab floor that needs the coating. Garage Floor Epoxy
cures directly onto concrete and actually chemically bonds to the concrete
surface for many years. Unlike paint, it will not chip or peel. It is
long-lasting and can be used to give your room that new look. Before applying
the epoxy coating, the floor must be vacuumed and swept in order to get a
proper surface bond. However, if the concrete that is being used is in
relatively decent shape in terms of its structural integrity, then the epoxy
can be reapplied.
New Home
Construction
When the garage
foundation slab is new concrete while constructing a new home, it is best to
request an epoxy coat during construction. The new, properly cured concrete
slab is the best substrate for garage floor epoxy. The layer of smooth epoxy
gives it a cleaner appearance than bare concrete; in addition, the floor is
shielded from future stains such as oil drips. It is desirable to apply the
epoxy coat immediately after the pour so that it has sufficient time to cure in
the concrete matrix.
DIY Installation
Even though it’s
always preferable to have the epoxy installed professionally, high-quality
garage floor epoxy kits are available for DIY installation. Do-it-yourself
homeowners who are willing to devote substantial time and effort to floor
preparation can apply epoxy satisfactorily. This makes epoxies to be suitable
flooring for all categories of home improvement enthusiasts and budgets. It is
also important to note that layering the paint in thin layers is more effective
than applying it in one thick layer.
Climate
Considerations
Epoxies may require
curing time meaning that the temperature at which these are applied and within
the first 24-48 hours will determine the outcome. It is ideal to apply this
product at temperatures ranging from 50-90 degrees Fahrenheit. Also, garages in
regions experiencing extreme freezing conditions may not be suitable. This may
result in epoxy losing adhesion properties over time due to the expanding and
contracting from the extreme temperature changes, and end up cracking. It’s
best to use epoxy in attached garages that are located in areas with moderate
climates.
Conclusion
No comments:
Post a Comment